Categories

False alarms and system hiccups can be aggravating, and more importantly, could prevent your home’s security from working how it should. Fortunately, most issues, from false alarms to dead batteries, are easy to remedy. Check out our recommendations for troubleshooting your home alarm system in Provo. We’ll help keep your family safe and your system running as it should.

Test Your Home Security System In Provo

One great way to troubleshoot your property’s security is to test it! Modern systems let you place them in test mode to prevent you from triggering an emergency response. After moving to test mode, take these steps:

• Arm your system as you normally would when you leave.
• Open a window or door that has a contact sensor, or test other devices. Shut the door or window once you’re finished so it doesn’t trip the alarm as you reactivate the system.
• Let the alarm sound for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Proceed to test equipment as you wish
• Inspect the system activity log to verify that everything’s working.

Rest assured, monitoring agents will be aware that your alarm system is involved in a test. Just make sure to switch off test mode when complete. It’s a good idea to test every other month or whenever you adjust your home’s internet or phone service.

Inspect The Position And Condition Of Motion Sensors

Although an essential aspect of your alarm system, motion detectors are prone to false alarms. Prevent them with some basic troubleshooting.

• Perform a physical check. Is there something that could shift within the sensor’s detection range, like a window treatment blown in a breeze?
• Is the sensor clean? Grime, dirt, and cobwebs can cause malfunctions. Ensure the sensor is clean.
• Does the motion detector have pet immunity you can enable? Some models can be set to ignore pets weighing up to 100 pounds.
• When was the battery changed? Low batteries can affect performance or result in false alarms.
• Is the sensor facing a source of heat? Too much heat from sunlight or a fireplace can set off an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Signals

One helpful benefit of the latest home security systems is that they’ll notify you when batteries are running low. If your system has a smartphone app or control panel, you’ll often discover alerts there. Depending on your alarm, you could notice an occasional beep when batteries are low. 

Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that should be replaced every 1 to 2 years. It’s best to keep batteries ready and create a replacement schedule. Many systems also come with a backup battery for the central control panel. This backup battery keeps your system functioning if you lose power and should recharge itself once power is restored. If it fails to recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Provo 

As the top name in home security, ADT creates systems that provide unrivaled functionality and protection. Accessing test mode is easy through the ADT+ app or MyADT.com, and you’ll always be sent alerts when a battery is low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Provo home. Call (801) 980-2683 or complete our form today!